-
Under the new economic normal, rubber and plastic sealing enterprises have accelerated their transformation, constantly looking for new development opportunities in the Internet platform, overseas markets, etc., and achieved certain results, most intuitively reflected in the increase of operating income. According to the 2016-2020 Research Results of China's Silicone Industry released by Linghe. com, the silicone sealing strip has the following characteristics: 1. The silicone material has good sealing performance and high resistance
Published on: August 7, 2019 Clicks: 87
-
What are the series of PU mold release agent? First of all, PU release agent is also called polyurethane release agent. Release agent has become an essential industrial raw material in industrial production, which plays a very important role in mold forming and the appearance and quality of product demoulding. Dongguan Meiya Chemical Co., Ltd. has developed the following non
Published on: August 6, 2019 Number of hits: 62
-
Among many thermal insulation materials, rubber and plastic thermal insulation materials can be said to be the best. Let's take a look at the advantages of rubber and plastic insulation layer: the advantages of rubber and plastic insulation material: 1. Green environmental protection: it does not contain harmful chlorine fluoride in the atmosphere, and meets the requirements of ISO14000 international environmental protection certification, so it will not produce any pollutants harmful to human health during installation and application. 2、
Published on: August 5, 2019 Clicks: 162
-
On the morning of August 29, 2017, the China Highway Society organized a review meeting on the outline of the 2017 project initiation group standard Technical Conditions for Collision Fenders of Highway Bridges, which was edited by CCCC First Highway Engineering Research Institute and participated by Xi'an CCCC Civil Engineering Technology Co., Ltd. The meeting was organized by Zhou Haitao, the former chief engineer of the Ministry of Transport, Li Yanwu, the former director of the Highway Bureau of the Ministry of Transport, and CCCC Science and Technology
Published on: August 1, 2019 Number of hits: 78
-
Rubber and plastic insulation materials are elastic closed cell elastic materials, which are soft, resistant to winding, cold, heat, flame retardant, waterproof, low thermal conductivity, shock absorption, sound absorption and other excellent properties, and can be widely used in central air-conditioning, construction, chemical industry, textile, metallurgy, communication, vehicles, electrical appliances and other industries and some kinds of cold and hot medium pipes, containers, It can reduce the cold loss and heat loss. add
Published on: July 31, 2019 Number of hits: 49
-
Shanghai Jiongjie Rubber and Plastic Industry Co., Ltd., located in Qifu Xinshang Science Park, Songjiang District, Shanghai, has more than 300 employees. It is a high-tech enterprise with independent research and development capabilities and provides customized intelligent accessories. After eight years of rapid development, four core business units of rubber products, plastic products, mechanical parts accessories and solar water heater accessories have been formed.
Published on: July 30, 2019 Clicks: 93
-
GD type (semi circular) rubber fender GD type (semi circular) rubber fender is a deformed product developed on the basis of D-type fender. The original D-type fender is anchored in the middle, which is easy to cause the fender to fall off during use. The super D-type fender is an embedded integral steel plate, which is anchored in two rows. In addition, the anchor bolt is increased, and its anchoring force is increased by about two places compared with the original D-type fender. The use shows that its anchoring force
Published on: July 30, 2019 Number of hits: 80
-
Dock specific anti-collision fender | polymer fender veneers, a domestic production and research and development base of thermal engineering plastics, welcome to visit the site at any time. The performance advantages of ultra-high polyethylene for fender veneers are as follows: First, under the condition of reverse force, the deformation range of fender veneers is increased, and the function of absorbing water is also improved. Absorption (KN-M) changes from 1
Published on: July 29, 2019 Number of hits: 63
-
Collision between ship and pier will not only cause damage to pier or hull structure, but also cause catastrophic consequences such as casualties and environmental pollution. Therefore, it is of great practical significance to install and design effective anti-collision fenders on bridge piers to absorb collision energy, reduce collision force between ships and bridges, and improve the safety of ships and bridges. Scholars at home and abroad have conducted a lot of research on anti-collision fenders
Published on: July 27, 2019 Number of hits: 72
-
Rubber fenders, also known as rubber fenders (English name: rubber fenders), are installed on docks or ships to absorb collision energy between ships and docks or between ships when they are docked or moored, so as to protect ships and docks from damage. The current industry standard of solid rubber fender is HG/T
Published on: July 26, 2019 Number of hits: 59
-
Dock specific anti-collision fender | polymer fender veneers, a domestic production and research and development base of thermal engineering plastics, welcome to visit the site at any time. Scope of use: It can well protect the hull from friction impact between the wharf and the hull, and protect the wharf from direct impact damage by heavy ships. UHMW-PE fender veneer and wheel guard sill are researched and developed by our company in Hong Kong
Published on: July 25, 2019 Number of hits: 52
-
Compared with traditional insulation pipes, directly buried prefabricated insulation pipes have outstanding advantages: 1. Good insulation performance, heat loss is only 25% of traditional pipes, long-term operation can save a lot of energy, significantly reducing energy costs. 2. With strong waterproof and corrosion resistance, it can be directly buried into the ground or water without the need for pipe trenches
Published on: July 24, 2019 Number of hits: 81
-
The full name of polyurethane pu product foam adhesive is one component polyurethane foam sealant, commonly known as foaming agent, foam adhesive, PU sealant, in English, PUFOAM, which is the cross combination of aerosol technology and polyurethane foam technology. Polyurethane foam adhesive is a special polyurethane product that can be filled with polyurethane prepolymer, foaming agent, catalyst and other components in a pressure resistant aerosol tank. When the material is transferred from
Published on: July 23, 2019 Number of hits: 60
-
According to the in-depth research and prospect forecast report of China's polyurethane industry from 2015 to 2020, the development of China's polyurethane industry in the future will be mainly driven by five aspects, namely, the total population, the automobile industry, the improvement of building energy conservation, environmental protection requirements and the leisure and entertainment industry. The consumption of PU products in China will maintain an average annual growth rate of 15%. Polyurethane product manufacturer
Published on: July 22, 2019 Number of hits: 72
-
From the perspective of product use effect, what are the functions of marine anti-collision ball? Here is some information about some of them. Marine anti-collision ball is a kind of anti-collision ball that is specially used in some ports. Due to the flexibility of the material, it can be used as a buffer protection device for yachts. It is not easy to deform, so it can be used in our related industries
Published on: July 18, 2019 Number of hits: 57
-
For all kinds of articles in life, our feelings about them are intuitive, such as the concepts of hardness, elasticity, toughness, brittleness, etc. This information obtained through intuitive feeling and perception is generally called qualitative judgment. Qualitative judgment is usually vague, imprecise and not conducive to comparison. Just as we know that iron is hard and steel is hard, which one is harder, except for the two
Published on: July 16, 2019 Number of hits: 52
-
We have already introduced the common raw materials of latex reclaimed rubber, tire reclaimed rubber and their application occasions in the production of rubber sheaths. Now let's take a look at the other two common reclaimed rubber - EPDM reclaimed rubber and nitrile reclaimed rubber. 3. EPDM recycled rubber production rubber sheath Some rubber sheaths need to be placed outdoors for a long time. Long time exposure to the sun or cold attacks
Published on: July 15, 2019 Clicks: 77
-
Each kind of gasket has different uses in industry. Today, Haisheng Rubber Belt introduces you to several common flat gaskets, including the following common ones and their performance: Shanghai Jiongjie Rubber and Plastic Industry Co., Ltd., located in Qifu Xinshang Science Park, Songjiang District, Shanghai, has more than 300 employees, and is a company with independent research and development capabilities, High technology to provide customized intelligent accessories
Published on: July 12, 2019 Clicks: 74
-
If you want to know which industries the silicone seal ring is used in, you should first understand the advantages, disadvantages and basic performance of the silicone seal ring. First, introduce its performance. Silicone sealing ring is a silicone product, which is non-toxic and tasteless, has good temperature resistance (it can work normally at - 50 ℃ - 250 ℃), and does not produce harmful substances. Good tensile resistance, no deformation and unchanged after long-term use
Published on: July 6, 2019 Number of hits: 133
-
The 2019 International Rubber and Plastics Exhibition was held in Guangzhou as scheduled, which is in sharp contrast to the current weakness of the machinery industry. This exhibition, which is the second largest in the world after the K exhibition in Germany, is thriving. This exhibition attracted more than 150000 visitors from all over the world, including buyers who ordered plastic manufacturing equipment or plastic products on the spot. The exhibition is like a huge stage,
Published on: July 5, 2019 Number of hits: 39
147 in total
20 entries per page
Page: 4/8
