-
01 The rubber like elastic rubber is different from the elastic energy represented by the longitudinal elastic coefficient (Young's modulus). It refers to the so-called "rubber elasticity" that can be restored even for hundreds of percent deformation on the basis of the entropy elasticity generated by the contraction and spring off of the molecular lock. 02 Embodiment rubber
Published on: April 19, 2023 Number of hits: 296
-
NR (Natural Rubber) is a polymer of isoprene, which is made from rubber latex collected from rubber trees. It has good wear resistance, high elasticity, breaking strength and elongation. It is easy to age in air and become sticky when exposed to heat. It is easy to expand and dissolve in mineral oil or gasoline. It is alkali resistant but not strong acid resistant. Advantages: good elasticity, acid and alkali resistance. Weatherproof,
Published on: April 10, 2023 Clicks: 315
-
Natural rubber (NR) is a kind of natural macromolecular compound with cis-1,4-polyisoprene as the main component. Among its components, 91%~94% are rubber hydrocarbons (cis-1,4-polyisoprene), and the rest are non rubber substances such as protein, fatty acid, ash, sugar, etc. Natural rubber is the most widely used general rubber. Generally speaking, natural rubber refers to
Published on: October 30, 2019 Clicks: 104
-
Fender, also known as fender, is an energy buffer device used in port terminals or ships to mitigate the impact or shock of ships and docks or ships when berthing or mooring, so as to protect ships and docks from damage. The rubber fender has good elasticity, high energy absorption, convenient maintenance, long service life and is convenient for mass sizing production
Published on: August 23, 2019 Clicks: 94
-
The spacing and elevation of rubber fenders are very important. It is necessary to ensure that the ship can not directly touch the quay wall under the most unfavorable berthing angle allowed by the specification. It is also necessary to ensure that the ship can safely berth at different tide levels and draughts, and has strong adaptability to the berthing of ships of different tonnage. When selecting and deciding the layout scheme of Phase I, II and III fenders of the coal terminal
Published on: August 19, 2019 Number of hits: 80
-
With the development of China's shipping industry, the demand for port and ship fenders is increasing, and the requirements for the performance of fenders are also increasing. Among them, rubber fenders are most widely used because of their good toughness and impact resistance. At present, there are many manufacturers of rubber fenders in China, with good and bad products. In order to survive in the fierce market competition, some manufacturers unilaterally take low-cost competition as the main means, and are lax
Published on: August 14, 2019 Clicks: 118
-
The influence and development level of the rubber fenders industry China's current rubber fenders and other shipbuilding industries, on the one hand, manufacture and consume various tools for the maritime transportation and land resources development and distribution industries; on the other hand, the shipbuilding industry is also one of the secondary providers of China's navy equipment, which can be described as having a quite high strategic position. With the support of international policies
Published on: June 21, 2019 Number of hits: 70
-
1、 The tapered ladder ZCTD-AA tapered rubber fender is the third generation product of the drum rubber fender. The new structural design of the tapered rubber body and the front steel frame is adopted, which increases the design compression deformation of the fender from 52.5% to 70% without increasing the reaction force, becoming one of the best rubber fenders today. Its appearance can make the wharf structural design lighter and reduce the size
Published on: June 12, 2019 Number of hits: 68
-
The full name of polyurethane foam adhesive is one component polyurethane foam sealant, commonly known as foaming agent, foam adhesive, PU sealant, in English, PUFOAM, which is the cross combination of aerosol technology and polyurethane foam technology. Polyurethane foam adhesive is a special polyurethane product that can be filled with polyurethane prepolymer, foaming agent, catalyst and other components in a pressure resistant aerosol tank. When the material is discharged from the aerosol tank
Published on: June 11, 2019 Clicks: 409
-
Polyurethane itself is non-toxic, but no material can be 100% pure. Polyols, isocyanates, surfactants, catalysts, foaming agents and some functional additives are required for the synthesis of polyurethane foam
Published on: June 11, 2019 Clicks: 467
-
For all kinds of articles in life, our feelings about them are intuitive, such as the concepts of hardness, elasticity, toughness, brittleness, etc. This information obtained through intuitive feeling and perception is generally called qualitative judgment. Qualitative judgment is usually vague, imprecise and not conducive to comparison. Just as we know that iron is hard and steel is hard, which one is harder, except for the two
Published on: June 11, 2019 Clicks: 262
-
The performance and advantages of the product are as follows: molded foam board This product has introduced foreign foam technology, and the foam density is uniform, with a density of 0.3-1.0g/cm3. The product is soft, light, good resilience, strong tensile force, high strength, odorless, tasteless and non-toxic. Long service life, high temperature resistance can reach more than 300 ℃ without deformation. Features: 1. UV resistant and ozone resistant
Published on: June 11, 2019 Number of hits: 46
-
Our factory specializes in the production of wharf fenders, wharf anti-collision plates, fender veneers and other special plates for the wharf. The following are the five highlights and application fields of our wharf anti-collision plates. Five advantages of dock anti-collision plate: 1. High molecular weight, light weight, easy to handle and install& n
Published on: June 11, 2019 Clicks: 55
-
Dock specific anti-collision fender | polymer fender veneers, a domestic production and research and development base of thermal engineering plastics, welcome to visit the site at any time. The performance advantages of ultra-high polyethylene for fender veneers are as follows: 1. fender veneers
Published on: June 11, 2019 Number of hits: 32
-
Classification of rubber fenders; Features and applications Generally, rubber fenders can be divided into two categories according to their structures: solid rubber fenders (non floating) and floating rubber fenders. Solid rubber fender (non floating type) is an anti-collision equipment for ships in wharf with an early application history and a wide application range. According to the stress condition of rubber fenders, they can be divided into shear type, rotary type and compression type; root
Published on: June 11, 2019 Clicks: 174
-
Rubber fenders are widely used in navigation, and also have a strong role in use. They can be divided into many types, such as cylindrical rubber fenders, semicircular (D-type) rubber fenders, drum rubber fenders, and inflatable berthing balls. What are their functions? What is the scope of application? Let's take a look. Each rubber fender has its own difference
Published on: June 11, 2019 Clicks: 71
-
Many customers do not understand the airbag fenders, so they will feel very distressed when purchasing. How should I choose a good manufacturer of airbag fenders? As an important rubber base in the north and an important port city in the north, Qingdao is home to many rubber industries. You will find that many manufacturers of airbags and fenders
Published on: June 11, 2019 Number of hits: 39
-
1. After the installation vessel's module is loaded, the floating installation vessel will transport the topside to the designated sea area, and install the topside on the fixed structure or floating structure by adjusting the ballast system. There are many factors that affect the selection of ships for maritime transportation, and the draft limit, width limit, load limit and platform transportation are comprehensively considered
Published on: June 11, 2019 Number of hits: 104
-
The floating installation method of offshore platform topsides has become an effective installation method since the 1980s. After years of practice and exploration in the industry, not only the weight of the installation structure is increasing, but also the installation method is constantly challenging the worse construction sea conditions. The floating method solves the contradiction that the module construction cannot be expanded due to the limitation of lifting capacity, and improves the efficiency of platform construction
Published on: June 11, 2019 Number of hits: 59
-
The float over method (float over installation method) is an installation technology that uses a barge to carry the topside of the offshore operation platform. During the installation process, the topside is lifted and lowered by means of tide level, barge load adjustment and lifting mechanism. At the same time, special connecting parts are used to complete the butt joint between the topside and the lower jacket platform. During the floating installation of offshore platform module, the module is loaded by tug
Published on: June 11, 2019 Clicks: 73
-
With the exploration and development of offshore oil fields, the offshore oil industry has developed rapidly. The offshore operation platform is developing in the direction of large-scale and intensive, and the overall weight of the offshore platform topside structure also increases. The rapid development of offshore oil and gas field development has put forward higher requirements for the installation technology and operation capability of offshore super large platforms
Published on: June 11, 2019 Number of hits: 65
-
Filling operation of LNG bunkering ship usually refers to the operation that the LNG bunkering ship alongside the receiving ship and transmits LNG to the receiving ship. This operation can be carried out when the receiving vessel is berthing at the wharf, anchorage, or both vessels are sailing. During the refueling operation, the inflatable fenders usually float on the water surface to absorb the collision energy during berthing and maintain a proper balance distance between the two ships. Inflatable fender
Published on: June 11, 2019 Clicks: 54